Support material testing and equipment testing
Focus on R & D and manufacturer of plasma cleaning machine for 20 years
The common alarm lamp alarm failure of low-temperature plasma surface treatment machine turns out to be because of:
I believe that when you use low-temperature plasma surface treatment equipment, during the use of low-temperature plasma surface treatment equipment, it is inevitable that the equipment alarm lamp will fail and stop running. However, if the failure occurs frequently, it will definitely be annoying. Confused. At this time, everyone should contact the manufacturer to help solve it. If the manufacturer’s response speed is slow and the production is relatively urgent, then you also need to have some common troubleshooting and resolution related knowledge. Chengfeng Zhizao has introduced you to the low-temperature plasma surface treatment machine before. The warning lights are mainly divided into warning lights with buzzer and LED tri-color warning lights, then Chengfeng Zhizao will introduce you to the common causes of warning lights failure.
The alarm of the low-temperature plasma surface treatment machine equipment is usually because the air pressure is too low. At this time, it is necessary to check whether there is a gas connected to the gas and whether the gas pressure is within the set range. The pressure value of the process gas is one of the important working parameters of the plasma equipment. If the pressure value is too high or too low, it will have a great impact on the treatment effect, while the pressure value is too high or too low will affect the treatment effect, and the pressure value is too high. High or too low will cause irreversible loss of equipment.
The low-temperature plasma surface treatment machine is equipped with alarm lights, which makes it easier for the operator to observe the current status of the equipment. When the low-temperature plasma surface treatment machine equipment fails, it can automatically display alarm information, which is convenient for customers to find and eliminate the fault. After the fault is removed, press the reset button. If the fault has been completely resolved, the fault red light will turn to steady yellow Light, the machine is in the normal standby state at this time, and it can operate normally.
The above are the common alarm reasons for low-temperature plasma surface treatment equipment. If you want to know more product details or have questions about the use of the equipment, please click Chengfeng Zhizao online customer service, Chengfeng Zhizao is waiting for your call!
Vacuum plasma equipment is the best choice to improve the reliability of copper lead frame bonding and packagingmore >
Chengfeng Zhimanu often uses aluminum alloy in the cavity of vacuum plasma equipment. This is whymore >
Chengfeng Zhizhuang vacuum plasma machine introduces you the type and structure of plasma processing chambemore >
Why is the analysis of plasma generator probe parameters so complicated? How to optimize?more >
Inkjet printing of low-temperature oxygen plasma treated silk fabric by plasma cleaning machinemore >
The effect of plasma cleaning machine plasma treatment on the salt resistance of super absorbent resimore >